FCC ID N6C-SDMAX
N6CSDMAX, N6C SDMAX, N6C-SDMAX, N6C-5DMAX
Silex Technology, Inc. Wireless Embedded Module SDMAX
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: N6C-SDMAX is N6C. The remaining characters of the FCC ID, -SDMAX, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
Wireless Embedded Module
- Application: Wireless Embedded Module
- Equipment Class: DTS - Digital Transmission System
- Short Link: fcc.id/N6C-SDMAX
- Sources: FCC.gov | FCC.report
- Registered By: Silex Technology, Inc. - N6C (Japan)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2023-05-22 | RGzvUN2y0jP8XKxcSpk8eg== |
| 2 | Original Equipment | 2023-05-22 | Y8EEZUMRKJ54H57L0xRwtw== |
| 3 | Original Equipment | 2023-05-22 | Q8h9356tWPSwk0Hjimu6sg== |
| 4 | Class II Permissive Change | 2024-05-02 | wD7//UGbQXisb6iLYzxehA== |
| 5 | Class II Permissive Change | 2025-05-06 | 44Y6kXJ3za52PE2rEQvOfA== |
| 6 | Class II Permissive Change | 2025-05-06 | 3BBhJY4oEDryBLNFdc7YMg== |
Operating Frequencies
Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
| Frequency Range | Power Output | Rule Parts | Grant Notes | App # |
|---|---|---|---|---|
2.402-2.48 GHz  | 8 mW | 15C | CC | 2.1 |
| 2.402-2.48 GHz | 2 mW | 15C | CC | 3.1 |
2.412-2.462 GHz  | 227 mW | 15C | CC | 3.2 |
| 2.412-2.462 GHz | 227 mW | 15C | CC | 6.1 |
5.18-5.24 GHz  | 44 mW | 15E | CC | 1.1 |
| 5.18-5.24 GHz | 44 mW | 15E | CC | 4.1 |
| 5.18-5.24 GHz | 44 mW | 15E | CC | 5.1 |
5.26-5.32 GHz  | 44 mW | 15E | CC, ND | 1.2 |
| 5.26-5.32 GHz | 44 mW | 15E | CC, ND | 4.2 |
| 5.26-5.32 GHz | 44 mW | 15E | CC, ND | 5.2 |
| 5.5-5.72 GHz | 44 mW | 15E | CC, ND | 1.3 |
| 5.5-5.72 GHz | 44 mW | 15E | CC, ND | 4.3 |
| 5.5-5.72 GHz | 44 mW | 15E | CC, ND | 5.3 |
| 5.745-5.825 GHz | 44 mW | 15E | CC | 1.4 |
| 5.745-5.825 GHz | 44 mW | 15E | CC | 4.4 |
| 5.745-5.825 GHz | 44 mW | 15E | CC | 5.4 |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Users Manual rev2 | Users Manual Adobe Acrobat PDF (330 kB) |
2024-05-02 2024-05-02 |
| 4 | Test Set Up Photos rev | Test Setup Photos Adobe Acrobat PDF (897 kB) |
2024-05-02 2024-05-02 |
| 4 | Test Set Up Photos (DFS) | Test Setup Photos Adobe Acrobat PDF (116 kB) |
2024-05-02 2024-05-02 |
| 4 | Test Report (NII) rev | Test Report Adobe Acrobat PDF (5930 kB) |
2024-05-02 2024-05-02 |
| 4 | Test Report (DFS) rev | Test Report Adobe Acrobat PDF (749 kB) |
2024-05-02 2024-05-02 |
| 4 | RF Exposure Info (MPE) | RF Exposure Info Adobe Acrobat PDF (301 kB) |
2024-05-02 2024-05-02 |
| 4 | Internal Photos | Internal Photos Adobe Acrobat PDF (289 kB) |
2024-05-02 2024-05-02 |
| 4 | External Photos rev | External Photos Adobe Acrobat PDF (1051 kB) |
2024-05-02 2024-05-02 |
| 4 | Cover Letter (Description of Change) rev | Cover Letter(s) Adobe Acrobat PDF (158 kB) |
2024-05-02 2024-05-02 |
| 4 | Cover Letter (Agent Authorization) rev | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2024-05-02 2024-05-02 |
| 4 | Confidentiality Request rev | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2024-05-02 2024-05-02 |
| 4 | Attestation (U.S. local Agent Letter) rev | Attestation Statements Adobe Acrobat PDF (144 kB) |
2024-05-02 2024-05-02 |
| 4 | Attestation (Statements of part 2.911(d)(5)) rev | Attestation Statements Adobe Acrobat PDF (37 kB) |
2024-05-02 2024-05-02 |
| 4 | Antenna Datasheet | Test Report Adobe Acrobat PDF (2083 kB) |
2024-05-02 2024-05-02 |
| 2 | Test report (DSS) rev | Test Report Adobe Acrobat PDF (1565 kB) |
2023-05-22 2023-05-22 |
| 2 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 2023-05-22 |
| 2 | Label Sample & Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 2023-05-22 |
| 2 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 2023-05-22 |
| 2 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 2 | Confidentiality Request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 2023-05-22 |
| 2 | Confidentiality Request (Long term ) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 2 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 2023-05-22 |
| 2 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 2023-05-22 |
| 2 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 6) rev3 | Test Report Adobe Acrobat PDF (1175 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 5) rev3 | Test Report Adobe Acrobat PDF (1680 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 4) rev3 | Test Report Adobe Acrobat PDF (2389 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 3) rev3 | Test Report Adobe Acrobat PDF (2900 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 2) rev3 | Test Report Adobe Acrobat PDF (2901 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (NII-part 1) rev3 | Test Report Adobe Acrobat PDF (1977 kB) |
2023-05-22 2023-05-22 |
| 1 | Test report (DFS) | Test Report Adobe Acrobat PDF (1126 kB) |
2023-05-22 2023-05-22 |
| 1 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 2023-05-22 |
| 1 | Label Sample and Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 2023-05-22 |
| 1 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 2023-05-22 |
| 1 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 1 | Confidentiality request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 2023-05-22 |
| 1 | Confidentiality Request (Long term) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 1 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 2023-05-22 |
| 1 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 2023-05-22 |
| 1 | Attestation (DFS Client Declaration) | Attestation Statements Adobe Acrobat PDF (115 kB) |
2023-05-22 2023-05-22 |
| 1 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 2023-05-22 |
| 3 | Test report (DTS-WLAN) rev2 | Test Report Adobe Acrobat PDF (4105 kB) |
2023-05-22 2023-05-22 |
| 3 | Test report (DTS-BTLE) rev2 | Test Report Adobe Acrobat PDF (1725 kB) |
2023-05-22 2023-05-22 |
| 3 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 2023-05-22 |
| 3 | Label Sample and Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 2023-05-22 |
| 3 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 2023-05-22 |
| 3 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 3 | Confidentiality Request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 2023-05-22 |
| 3 | Confidentiality Request (Long term) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 2023-05-22 |
| 3 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 2023-05-22 |
| 3 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 2023-05-22 |
| 3 | Attestation (Channel and Mode Declaration) | Attestation Statements Adobe Acrobat PDF (25 kB) |
2023-05-22 2023-05-22 |
| 3 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 2023-05-22 |
APP # 4 (2024-05-02)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Users Manual rev2 | Users Manual Adobe Acrobat PDF (330 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Test Set Up Photos rev | Test Setup Photos Adobe Acrobat PDF (897 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Test Set Up Photos (DFS) | Test Setup Photos Adobe Acrobat PDF (116 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Test Report (NII) rev | Test Report Adobe Acrobat PDF (5930 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Test Report (DFS) rev | Test Report Adobe Acrobat PDF (749 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | RF Exposure Info (MPE) | RF Exposure Info Adobe Acrobat PDF (301 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Internal Photos | Internal Photos Adobe Acrobat PDF (289 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | External Photos rev | External Photos Adobe Acrobat PDF (1051 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Cover Letter (Description of Change) rev | Cover Letter(s) Adobe Acrobat PDF (158 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Cover Letter (Agent Authorization) rev | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Confidentiality Request rev | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Attestation (U.S. local Agent Letter) rev | Attestation Statements Adobe Acrobat PDF (144 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Attestation (Statements of part 2.911(d)(5)) rev | Attestation Statements Adobe Acrobat PDF (37 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
| 4 | Antenna Datasheet | Test Report Adobe Acrobat PDF (2083 kB) |
2024-05-02 00:00:00 2024-05-02 00:00:00 |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Test report (DSS) rev | Test Report Adobe Acrobat PDF (1565 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Label Sample & Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Confidentiality Request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Confidentiality Request (Long term ) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 2 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Test report (NII-part 6) rev3 | Test Report Adobe Acrobat PDF (1175 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (NII-part 5) rev3 | Test Report Adobe Acrobat PDF (1680 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (NII-part 4) rev3 | Test Report Adobe Acrobat PDF (2389 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (NII-part 3) rev3 | Test Report Adobe Acrobat PDF (2900 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (NII-part 2) rev3 | Test Report Adobe Acrobat PDF (2901 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (NII-part 1) rev3 | Test Report Adobe Acrobat PDF (1977 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Test report (DFS) | Test Report Adobe Acrobat PDF (1126 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Label Sample and Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Confidentiality request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Confidentiality Request (Long term) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Attestation (DFS Client Declaration) | Attestation Statements Adobe Acrobat PDF (115 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 1 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Test report (DTS-WLAN) rev2 | Test Report Adobe Acrobat PDF (4105 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Test report (DTS-BTLE) rev2 | Test Report Adobe Acrobat PDF (1725 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | RF Exposure Info (MPE) rev | RF Exposure Info Adobe Acrobat PDF (510 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Label Sample and Label Location | ID Label/Location Info Adobe Acrobat PDF (25 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Cover Letter (Modular Approval Request) | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Cover Letter (Agent Authorization) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Confidentiality Request (Short term) | Cover Letter(s) Adobe Acrobat PDF (32 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Confidentiality Request (Long term) | Cover Letter(s) Adobe Acrobat PDF (42 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Attestation-U.S. local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (93 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Attestation-Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (43 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Attestation (Channel and Mode Declaration) | Attestation Statements Adobe Acrobat PDF (25 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
| 3 | Antenna Datasheet | Test Report Adobe Acrobat PDF (1768 kB) |
2023-05-22 00:00:00 2023-05-22 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational Description | Operational Description Adobe Acrobat PDF (237 kB) |
2023-05-22 00:00:00 N/A |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Block diagram | Block Diagram Adobe Acrobat PDF (268 kB) |
2023-05-22 00:00:00 N/A |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Schematics | Schematics Adobe Acrobat PDF (649 kB) |
2023-05-22 00:00:00 N/A |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Test setup photos | Test Setup Photos Adobe Acrobat PDF (1289 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Test setup photos | Test Setup Photos Adobe Acrobat PDF (1289 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Internal photos | Internal Photos Adobe Acrobat PDF (419 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | External photos | External Photos Adobe Acrobat PDF (665 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
| 1 | Users Manual | Users Manual Adobe Acrobat PDF (207 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Operational Description | Operational Description Adobe Acrobat PDF (237 kB) |
2023-05-22 00:00:00 N/A |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Users Manual | Users Manual Adobe Acrobat PDF (207 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Block diagram | Block Diagram Adobe Acrobat PDF (268 kB) |
2023-05-22 00:00:00 N/A |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Schematics | Schematics Adobe Acrobat PDF (649 kB) |
2023-05-22 00:00:00 N/A |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Internal photos | Internal Photos Adobe Acrobat PDF (419 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 4 (2024-05-02)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Operational Description | Operational Description Adobe Acrobat PDF (197 kB) |
2024-05-02 00:00:00 N/A |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Operational Description | Operational Description Adobe Acrobat PDF (237 kB) |
2023-05-22 00:00:00 N/A |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | External photos | External Photos Adobe Acrobat PDF (665 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Software Operational Description | Operational Description Adobe Acrobat PDF (186 kB) |
2023-05-22 00:00:00 N/A |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Schematics | Schematics Adobe Acrobat PDF (649 kB) |
2023-05-22 00:00:00 N/A |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Users Manual | Users Manual Adobe Acrobat PDF (207 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Test setup photos (DFS) | Test Setup Photos Adobe Acrobat PDF (114 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Test setup photos | Test Setup Photos Adobe Acrobat PDF (1289 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 3 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Block diagram | Block Diagram Adobe Acrobat PDF (268 kB) |
2023-05-22 00:00:00 N/A |
APP # 1 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Internal photos | Internal Photos Adobe Acrobat PDF (419 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
APP # 2 (2023-05-22)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | External photos | External Photos Adobe Acrobat PDF (665 kB) |
2023-05-22 00:00:00 2023-08-01 00:00:00 |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 05/06/2025 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Class II Permissive Change to add two specific antennas, described in
the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929). Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
r="0" width="100%">
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/06/2025 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Class II Permissive Change to add two specific antennas, described in the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929). Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA526303 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Vista Laboratories, Inc. 1261 Puerta Del Sol San Clemente, CA 92673 |
Date of Grant: 05/06/2025 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Class II Permissive Change to add specific antennas, described in the
filing (PANOPRAMA ANTENNAS, Model: LG-IN2929). Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
r="0" width="100%">
COPY
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/06/2025 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Class II Permissive Change to add specific antennas, described in the filing (PANOPRAMA ANTENNAS, Model: LG-IN2929). Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA196122 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.227 |
| Power listed is maximum conducted output power. This device supports 20/40 MHz bandwidth modes for WLAN. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA760180 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA703744 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/02/2024 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| C2PC for adding new antenna models and updating firmware as described in this filing. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/02/2024 |
| Attention: Yukinari Shibuya , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.044 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.044 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.044 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.044 |
| C2PC for adding new antenna models and updating firmware as described in this filing. Power listed is maximum conducted output power. This device supports 20/40/80 MHz bandwidth modes. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA374145 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 05/22/2023 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 05/22/2023 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAX |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Embedded Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA736273 |