FCC ID MSQ-QCNFA725
MSQQCNFA725, MSQ QCNFA725, MSQ-QCNFA725, MSQ-OCNFA725, MSQ-0CNFA725, MSQ-QCNFA72S, M5Q-QCNFA725, MSO-OCNFA725, MS0-0CNFA725
ASUSTeK Computer Inc Wi-Fi 6E+BT 5.2 Module QCNFA725
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: MSQ-QCNFA725 is MSQ. The remaining characters of the FCC ID, -QCNFA725, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
Wi-Fi 6E+BT 5.2 Module
- Application: Wi-Fi 6E+BT 5.2 Module
- Equipment Class: NII - Unlicensed National Information Infrastructure TX
- Short Link: fcc.id/MSQ-QCNFA725
- Sources: FCC.gov | FCC.report
- Registered By: ASUSTeK Computer Inc - MSQ (Taiwan)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Change in Identification | 2024-10-28 | akJ7XPY1X+l2ELngaDmE5g== |
| 2 | Change in Identification | 2024-10-28 | +IyVa00QG6fJrLG+ohTi2w== |
| 3 | Change in Identification | 2024-10-28 | JKFJ0rbdAb2NicNobkVKrQ== |
| 4 | Change in Identification | 2024-10-28 | aJEvUjbbGLSK9L1bFltXag== |
| 5 | Change in Identification | 2024-10-28 | 5FG8MJkk9D19b2JReUFALA== |
| 6 | Class II Permissive Change | 2024-11-25 | FHVobh2Q3vywb/GvM2gvaA== |
| 7 | Class II Permissive Change | 2024-11-25 | HFCj6l2wpbrxTvCSAVctyQ== |
| 8 | Class II Permissive Change | 2024-11-25 | hdxaKHZyosxa0qjPmE4PWw== |
| 9 | Class II Permissive Change | 2024-11-25 | 3xPusT+fSFQwuGyCgC3cMQ== |
| 10 | Class II Permissive Change | 2025-04-01 | p7Qpqe255dJrr5e+w+wAog== |
| 11 | Class II Permissive Change | 2025-04-01 | oO+IXsiEXopSLtD4VYKiPA== |
| 12 | Class II Permissive Change | 2025-04-01 | ckUMScXtJn3oZgKOsO/BNg== |
| 13 | Class II Permissive Change | 2025-04-01 | /3OdKjt6HjRbsciKUz7YsA== |
Operating Frequencies
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-06 2024-10-28 |
| 4 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-06 2024-10-28 |
| 4 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-06 2024-10-28 |
| 4 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-06 2024-10-28 |
| 4 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-06 2024-10-28 |
| 4 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-06 2024-10-28 |
| 4 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-06 2024-10-28 |
| 4 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-06 2024-10-28 |
| 4 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-06 2024-10-28 |
| 4 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-06 2024-10-28 |
| 5 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-06 2024-10-28 |
| 5 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-06 2024-10-28 |
| 5 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-06 2024-10-28 |
| 5 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-06 2024-10-28 |
| 5 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-06 2024-10-28 |
| 5 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-06 2024-10-28 |
| 5 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-06 2024-10-28 |
| 5 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-06 2024-10-28 |
| 5 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-06 2024-10-28 |
| 5 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-06 2024-10-28 |
| 2 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-04 2024-10-28 |
| 2 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-04 2024-10-28 |
| 2 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-04 2024-10-28 |
| 2 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-04 2024-10-28 |
| 2 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-04 2024-10-28 |
| 2 | Confidentiality Request Letter (LTC) | Cover Letter(s) Adobe Acrobat PDF (140 kB) |
2024-10-04 2024-10-28 |
| 2 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-04 2024-10-28 |
| 2 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-04 2024-10-28 |
| 2 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-04 2024-10-28 |
| 2 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-04 2024-10-28 |
| 2 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-04 2024-10-28 |
| 1 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-04 2024-10-28 |
| 1 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-04 2024-10-28 |
| 1 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-04 2024-10-28 |
| 1 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-04 2024-10-28 |
| 1 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-04 2024-10-28 |
| 1 | Confidentiality Request Letter (LTC) | Cover Letter(s) Adobe Acrobat PDF (140 kB) |
2024-10-04 2024-10-28 |
| 1 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-04 2024-10-28 |
| 1 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-04 2024-10-28 |
| 1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-04 2024-10-28 |
| 1 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-04 2024-10-28 |
| 1 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-04 2024-10-28 |
APP # 4 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 4 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
APP # 5 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 5 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
APP # 2 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Confidentiality Request Letter (LTC) | Cover Letter(s) Adobe Acrobat PDF (140 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 2 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
APP # 1 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Confidentiality Request Letter (LTC) | Cover Letter(s) Adobe Acrobat PDF (140 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
| 1 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-04 00:00:00 2024-10-28 00:00:00 |
APP # 3 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Change in ID Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (78 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Contact Authorization Letter (Qualcomm) | Cover Letter(s) Adobe Acrobat PDF (90 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | External Photos (part 2) | External Photos Adobe Acrobat PDF (1384 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (156 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (509 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Attestation Statements-US local Agent Letter of part 2.911(d)(7) | Attestation Statements Adobe Acrobat PDF (234 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Change in ID Request Letter rev | Cover Letter(s) Adobe Acrobat PDF (143 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
APP # 2 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Software Operational Description | SDR Software/Security Inf Adobe Acrobat PDF (220 kB) |
2024-10-04 00:00:00 N/A |
APP # 3 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | External Photos (part 1) | External Photos Adobe Acrobat PDF (226 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
APP # 1 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Software Operational Description | SDR Software/Security Inf Adobe Acrobat PDF (220 kB) |
2024-10-04 00:00:00 N/A |
APP # 3 (2024-10-28)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Label Location Info | ID Label/Location Info Adobe Acrobat PDF (132 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
| 3 | Attestation Statements of part 2.911(d)(5) | Attestation Statements Adobe Acrobat PDF (172 kB) |
2024-10-06 00:00:00 2024-10-28 00:00:00 |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
| Application for Equipment Authorization FCC Form 731 TCB Version |
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 10/28/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.24 W/kg, respectively. Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/28/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 & 260-25083 highest reported Body and Simultaneous SAR values are 0.72 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.24 W/kg, respectively. Class II Permissive Change to adding U-NII-4 and U-NII -3 & -4 span channels through software enable. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA429766 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/01/2025 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 04/01/2025 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA694793 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA890709 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 10/28/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1. W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/28/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.69 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1. W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA551053 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 10/28/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.09 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.24 W/kg, respectively. CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/28/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.53 W/kg, respectively. The test separation distance is 15mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.09 W/kg and 1.45 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.24 W/kg, respectively. CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA530573 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 10/28/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.76 W/kg, 5.41W/m^2, 4.96W/m^2 and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.46 W/kg, 3.29W/m^2, 4.98W/m^2 and 1.53 W/kg, respectively. The test separation distance is 17mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.20 W/kg, 1.32W/m^2, 3.64W/m^2 and 0.93 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.26 W/kg, 2.14W/m^2, 4.59W/m^2 and 0.77 W/kg, respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/28/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| CIIPC for this application. This change establishes portable category SAR conditions. The test separation distance is 8mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.76 W/kg, 5.41W/m^2, 4.96W/m^2 and 1.54 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.46 W/kg, 3.29W/m^2, 4.98W/m^2 and 1.53 W/kg, respectively. The test separation distance is 17mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body, APD, PD and Simultaneous SAR values are 0.20 W/kg, 1.32W/m^2, 3.64W/m^2 and 0.93 W/kg, respectively. The Monopole antenna Brand: HONGBO / Model: 260-25084 highest reported Body, APD, PD and Simultaneous SAR values are 0.26 W/kg, 2.14W/m^2, 4.59W/m^2 and 0.77 W/kg, respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA141307 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/01/2025 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 04/01/2025 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA549455 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.03 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.026 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA682177 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA718812 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 11/25/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 11/25/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.164 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.164 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.116 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.163 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.608 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.391 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.656 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.593 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.178 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 0.98 W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
EA711130 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 10/28/2024 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 10/28/2024 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E+BT 5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA441656 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/01/2025 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 04/01/2025 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.61 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.011 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA261382 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 04/01/2025 |
| ASUSTeK Computer Inc |
| 1F, No. 15, Lide Rd. |
| Beitou, Taipei, 112 Taiwan |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION COPY Certification
|
ASUSTeK Computer Inc 1F, No. 15, Lide Rd. Beitou, Taipei, 112 Taiwan |
Date of Grant: 04/01/2025 |
| Attention: Jackson Yen , Associate Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MSQ-QCNFA725 |
| Name of Grantee: | ASUSTeK Computer Inc |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Wi-Fi 6E BT 5.2 M.2 1418 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.547 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.538 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX3407Q, BX3407Q, RX3407Q, UX3407R, BX3407R and RX3407R with the antenna LUXSHARE-ICT, part no. LA9RF586-NB-H (14008-06220100), LA9RF585-NB-H (14008-06220000). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.83 W/kg and 0.98 W/kg respectively. WLAN TAS feature enabled. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |
EA208732 |