FCC ID H9PMR400

H9P-MR400, H9P MR400, H9PMR400, H9PMR4OO

Symbol Technologies Inc MR400 RFID Reader Module MR400

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: H9PMR400 is H9P. The remaining characters of the FCC ID, MR400, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: MR400 RFID Reader Module

Application: MR400 RFID Reader Module
Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Short Link: fcc.id/H9PMR400
Sources: FCC.gov | FCC.report
Registered By: Symbol Technologies Inc - H9P (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2006-10-17	wtKR5yGIwVRKgHAcM42Eaw==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
902.75-927.25 MHz	933 mW	15C	1

Exhibits

Document	Type	Submitted Available
Manual	Users Manual Adobe Acrobat PDF (622 kB)	2006-10-17 2006-10-17
Set up photos	Test Setup Photos Adobe Acrobat PDF (176 kB)	2006-10-17 2006-10-17
Test report	Test Report Adobe Acrobat PDF (2796 kB)	2006-10-17 2006-10-17
RF Exposure Info MPE	RF Exposure Info Adobe Acrobat PDF (38 kB)	2006-10-17 2006-10-17
Internal photos	Internal Photos Adobe Acrobat PDF (357 kB)	2006-10-17 2006-10-17
FCC ID label	ID Label/Location Info Adobe Acrobat PDF (137 kB)	2006-10-17 2006-10-17
External photos	External Photos Adobe Acrobat PDF (70 kB)	2006-10-17 2006-10-17
Response to ATCB	Cover Letter(s) Adobe Acrobat PDF (18 kB)	2006-10-17 2006-10-17
ATCB comments	Cover Letter(s) Adobe Acrobat PDF (58 kB)	2006-10-17 2006-10-17
Letter POA	Cover Letter(s) Adobe Acrobat PDF (22 kB)	2006-10-17 2006-10-17
Request for Modular Approval	Cover Letter(s) Adobe Acrobat PDF (280 kB)	2006-10-17 2006-10-17
Request for Confidentiality	Cover Letter(s) Adobe Acrobat PDF (122 kB)	2006-10-17 2006-10-17
Parts list	Parts List/Tune Up Info Adobe Acrobat PDF (30 kB)	2006-10-17
Operational description of frequency hopping	Operational Description Adobe Acrobat PDF (14 kB)	2006-10-17
Block diagram	Block Diagram Adobe Acrobat PDF (143 kB)	2006-10-17
Schematics	Schematics Adobe Acrobat PDF (419 kB)	2006-10-17
Operational description ckt description	Operational Description Adobe Acrobat PDF (27 kB)	2006-10-17

Application Forms

1 (2006-10-17)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Symbol Technologies Inc
FCC Registration Number (FRN):	0003505542
Alphanumeric FCC ID:	H9PMR400
Unique Application Identifier:	wtKR5yGIwVRKgHAcM42Eaw==
Line one:	1 Zebra Plaza
City:	Holtsville
State:	New York
Country:	United States
Zip Code:	11742

TCB Information

TCB Application Email Address:	[email protected]
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	H9P
Product Code:	MR400

Person at the applicant's address to receive grant or for contact

Name:	Mark Luksich
Title:	DMTS, Regulatory

Telephone Number:

631-738-5134

Extension:

Fax Number:	631 738-3915
Email:	[email protected]
Mail Stop:	B-13

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	MR400 RFID Reader Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Washington Laboratories, Ltd.

First Name: Michael

Last Name: Violette

Telephone Number:

800-839-1649

Extension:

Fax Number: 301-417-9069

E-mail: [email protected]

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator as specified in the filing. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Michael F. Violette

Title of authorized signature:

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/17/2006

Application Dated: 10/17/2006

Symbol Technologies Inc

1 Zebra Plaza

Holtsville, NY 11742

Attention: Mark Luksich , DMTS, Regulatory

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	H9PMR400

Name of Grantee:	Symbol Technologies Inc

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	MR400 RFID Reader Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	902.75 - 927.25	0.933

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator as specified in the filing. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.