FCC ID 2AP2R-ZALPHA3-MG

2AP2RZALPHA3-MG, 2AP2R ZALPHA3MG, 2AP2R-ZALPHA3-MG

DF Automation & Robotics ZALPHA AGV ZALPHA3-MG

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AP2R-ZALPHA3-MG is 2AP2R. The remaining characters of the FCC ID, -ZALPHA3-MG, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: ZALPHA AGV

Application: ZALPHA AGV
Equipment Class: DTS - Digital Transmission System
Short Link: fcc.id/2AP2R-ZALPHA3-MG
Sources: FCC.gov | FCC.report
Registered By: DF Automation & Robotics - 2AP2R (Malaysia)

App #	Purpose	Date	Unique ID
1	Original Equipment	2019-08-26	IV5WjfBZMGpCXBM5JKwRAw==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
2.412-2.462 GHz	6.4 mW	15C	1

Exhibits

Document	Type	Submitted Available
Zalpha User Manual	Users Manual Adobe Acrobat PDF (2699 kB)	2019-08-26 2019-08-26
test setup photos	Test Setup Photos Adobe Acrobat PDF (197 kB)	2019-08-26 2019-08-26
Test Report	Test Report Adobe Acrobat PDF (3720 kB)	2019-08-26 2019-08-26
RF exposure	RF Exposure Info Adobe Acrobat PDF (186 kB)	2019-08-26 2019-08-26
Long Term Confidentiality Request Letter	Cover Letter(s) Adobe Acrobat PDF (94 kB)	2019-08-26 2019-08-26
Label	ID Label/Location Info Adobe Acrobat PDF (892 kB)	2019-08-26 2019-08-26
Label location	ID Label/Location Info Adobe Acrobat PDF (730 kB)	2019-08-26 2019-08-26
internal photo	Internal Photos Adobe Acrobat PDF (730 kB)	2019-08-26 2019-08-26
External photos	External Photos Adobe Acrobat PDF (105 kB)	2019-08-26 2019-08-26
Antenna Specification	RF Exposure Info Adobe Acrobat PDF (2696 kB)	2019-08-26 2019-08-26
Agent Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (55 kB)	2019-08-26 2019-08-26
Block Diagram	Block Diagram Adobe Acrobat PDF (22 kB)	2019-08-26
PCB - AGV Expanxion Laser LED V1.2 Layers	Schematics Adobe Acrobat PDF (120 kB)	2019-08-26
Charger Module Schematic Diagram	Schematics Adobe Acrobat PDF (867 kB)	2019-08-26
Zalpha Block Diagram	Block Diagram Adobe Acrobat PDF (36 kB)	2019-08-26
PCB - AGV Main Controller Board V1.2 Layers	Schematics Adobe Acrobat PDF (958 kB)	2019-08-26
Zalpha-MG-E & Zalpha-MG-S Electrical BOM List	Parts List/Tune Up Info Adobe Acrobat PDF (651 kB)	2019-08-26
Schematic Diagram	Schematics Adobe Acrobat PDF (1498 kB)	2019-08-26
PCB - AGV Expansion Input Output V1.0 Layers	Schematics Adobe Acrobat PDF (149 kB)	2019-08-26
Bumper Module Schematic Diagram	Schematics Adobe Acrobat PDF (938 kB)	2019-08-26
Wifi module Schematic	Schematics Adobe Acrobat PDF (294 kB)	2019-08-26
PCB - AGV Magnetic Sensor Bar V2.1 Layers	Schematics Adobe Acrobat PDF (249 kB)	2019-08-26
Zalpha-MG-E & Zalpha-MG-S Mechanical BOM List	Parts List/Tune Up Info Adobe Acrobat PDF (1316 kB)	2019-08-26
Technical Description	Operational Description Adobe Acrobat PDF (328 kB)	2019-08-26

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	DF Automation & Robotics
FCC Registration Number (FRN):	0027557289
Alphanumeric FCC ID:	2AP2RZALPHA3MG
Unique Application Identifier:	IV5WjfBZMGpCXBM5JKwRAw==
Line one:	5, Jalan Impian Emas 18, Taman Impian Emas
P.O. Box:	81300
City:	Skudai Johor
State:	N/A
Country:	Malaysia
Zip Code:	81300

TCB Information

TCB Application Email Address:	[email protected]
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2AP2R
Product Code:	-ZALPHA3-MG

Person at the applicant's address to receive grant or for contact

Name:

Wei Kang Tey

Telephone Number:

0127998981

Extension:

Fax Number:	6075544269
Email:	[email protected]

Technical Contact

Firm Name:	Hong Kong Standards and Testing Centre Limited
First Name:	Lee
Middle Name:	Kam
Last Name:	Chuen
Line 1:	10 Dai Wang Street
Line 2:	Tai Po Industrial Estate, Tai Po, N.T.
City:	Hong Kong
Country:	China

Telephone Number:

0852- 2666 1888

Extension:

Fax Number:	0852- 2664 4353
E-Mail:	[email protected]

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	ZALPHA AGV

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: The Hong Kong Standards and Testing Centre Ltd.

First Name: Wilson

Last Name: Wong

Telephone Number:

852-2666-1888

Extension:

Fax Number: 852-2664-4353

E-mail: [email protected]

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. The device supports 20MHz and 40MHz bandwidth.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Mr Wei Kang Tey

Title of authorized signature: Manager

Complete items below if agent signs the application:

Firm Name: Hong Kong Standards and Testing Centre Limited

Name: Lee Lee Lee

Line 1: Lee

Line 2: Lee

P.O. Box: Lee

City: Lee

State: Lee

Country: Lee

Zip Code: Lee

Telephone Number:

0852-2666-1888

Fax Number: 0852-2664-4353

E-mail: [email protected]

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Eurofins MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432

Date of Grant: 08/26/2019

Application Dated: 08/26/2019

DF Automation & Robotics

5, Jalan Impian Emas 18, Taman Impian Emas

P.O. Box 81300,

Skudai Johor, 81300
Malaysia

Attention: Wei Kang Tey

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AP2R-ZALPHA3-MG

Name of Grantee:	DF Automation & Robotics

Equipment Class:	Digital Transmission System
Notes:	ZALPHA AGV

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.0064

Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter device. The device supports 20MHz and 40MHz bandwidth.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

DF Automation & Robotics
5, Jalan Impian Emas 18, Taman Impian Emas P.O. Box 81300,
Skudai Johor, 81300
Malaysia

Date of Grant: 08/26/2019

Application Dated: 08/26/2019

Attention: Wei Kang Tey

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AP2R-ZALPHA3-MG

Name of Grantee:	DF Automation & Robotics

Equipment Class:	Digital Transmission System
Notes:	ZALPHA AGV
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0 - 2462.0	0.0064

Mail To:

EA609274

FCC ID 2AP2R-ZALPHA3-MG

2AP2RZALPHA3-MG, 2AP2R ZALPHA3MG, 2AP2R-ZALPHA3-MG

DF Automation & Robotics ZALPHA AGV ZALPHA3-MG

Purchase on Amazon: ZALPHA AGV

Operating Frequencies

Exhibits

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details