FCC ID 2AGAAWMVRB915

FCC ID 2AGAAWMVRB915 Internal-Photos, 2AGAA WMVRB915, 2AGAAWMVRB915, 2AGAAWMVRB9I5, 2AGAAWMVRB91S

Harvard Technology Ltd Vertical Radio Board, Model WMVRB-915USA WMVRB915

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AGAAWMVRB915 is 2AGAA. The remaining characters of the FCC ID, WMVRB915, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Vertical Radio Board, Model WMVRB-915USA

*Please Check Individual Documents for more images

Application: Vertical Radio Board, Model WMVRB-915USA
Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Short Link: fcc.id/2AGAAWMVRB915
Sources: FCC.gov | FCC.report
Registered By: Harvard Technology Ltd - 2AGAA (United Kingdom)

App #	Purpose	Date	Unique ID
1	Original Equipment	2016-06-14	LOESNx+KLGs0YjptXrua5g==

Operating Frequencies

Frequency Range	Power Output	Rule Parts	Line Entry
905.2-915.91 MHz	11 mW	15C	1

Exhibits

Document	Type	Submitted Available
Agency Authorisation Letter	Cover Letter(s) Adobe Acrobat PDF (231 kB)	2016-06-14 2016-06-14
Hopping Declaration	Cover Letter(s) Adobe Acrobat PDF (220 kB)	2016-06-14 2016-06-14
Letter of Modular Request	Cover Letter(s) Adobe Acrobat PDF (268 kB)	2016-06-14 2016-06-14
Users Manual	Users Manual Adobe Acrobat PDF (820 kB)	2016-06-14 2016-06-14
Test Setup Photo	Test Setup Photos Adobe Acrobat PDF (445 kB)	2016-06-14 2016-06-14
Test Report	Test Report Adobe Acrobat PDF (1652 kB)	2016-06-14 2016-06-14
RF Exposure	RF Exposure Info Adobe Acrobat PDF (180 kB)	2016-06-14 2016-06-14
INTERNAL PHOTOS	Internal Photos Adobe Acrobat PDF (269 kB)	2016-06-14 2016-06-14
ID LABEL AND LOCATION	ID Label/Location Info Adobe Acrobat PDF (165 kB)	2016-06-14 2016-06-14
EXTERNAL PHOTOS	External Photos Adobe Acrobat PDF (280 kB)	2016-06-14 2016-06-14
LETTER OF CONFIDENTIALITY	Cover Letter(s) Adobe Acrobat PDF (227 kB)	2016-06-14 2016-06-14
LETTER OF AGENCY	Attestation Statements Adobe Acrobat PDF (236 kB)	2016-06-14 2016-06-14
Attestation Statements BOM	Parts List/Tune Up Info Adobe Acrobat PDF (113 kB)	2016-06-14
BLOCK DIAGRAM	Block Diagram Adobe Acrobat PDF (61 kB)	2016-06-14
OPERATIONAL DESCRIPTION	Operational Description Adobe Acrobat PDF (7 kB)	2016-06-14
Schematics	Schematics Adobe Acrobat PDF (623 kB)	2016-06-14

Application Forms

1 (2016-06-14)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Harvard Engineering
FCC Registration Number (FRN):	0024989543
Alphanumeric FCC ID:	2AGAAWMVRB915
Unique Application Identifier:	LOESNx+KLGs0YjptXrua5g==
Line one:	Harvard Engineering, Harvard House
Line two:	Tyler Close
City:	Normanton
State:	N/A
Country:	United Kingdom
Zip Code:	WF6 1RL

TCB Information

TCB Application Email Address:	[email protected]
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2AGAA
Product Code:	WMVRB915

Person at the applicant's address to receive grant or for contact

Name:

James Cheung

Telephone Number:

+44 113 383 1000

Extension:

259

Fax Number:	+44 113 383 1010
Email:	[email protected]

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Vertical Radio Board, Model WMVRB-915USA

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Element Materials Technology Warwick Ltd

First Name: Stewart

Last Name: Barrowclough

Telephone Number:

01695556666

Extension:

Fax Number: 01695557077

E-mail: [email protected]

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single-Modular Approval. RF output power listed is conducted. Approval is only for mobile conditions. The Grantee is responsible for providing instructions required for modular use. The responsibility for the use of this module, in all configurations utilised or contemplated, remains with the Grantee. Only the integral antenna tested with the device may used with this transmitter. The antenna used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; The transmitter and antenna must be installed such that a minimum separation distance of 20 cm is maintained between the radiator and all persons at all times.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Trever Parrett

Title of authorized signature: Approval Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TRaC Global Ltd
100 Frobisher Business Park Leigh Sinton Road, Malvern, Worcestershire
Malvern, WR14 1BX
United Kingdom

Date of Grant: 06/14/2016

Application Dated: 06/14/2016

Harvard Engineering

Harvard Engineering, Harvard House

Tyler Close

Normanton, WF6 1RL
United Kingdom

Attention: James Cheung

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AGAAWMVRB915

Name of Grantee:	Harvard Engineering

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Vertical Radio Board, Model WMVRB-915USA
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	905.2 - 915.91	0.011

Single-Modular Approval. RF output power listed is conducted. Approval is only for mobile conditions. The Grantee is responsible for providing instructions required for modular use. The responsibility for the use of this module, in all configurations utilised or contemplated, remains with the Grantee. Only the integral antenna tested with the device may used with this transmitter. The antenna used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; The transmitter and antenna must be installed such that a minimum separation distance of 20 cm is maintained between the radiator and all persons at all times.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harvard Engineering
Harvard Engineering, Harvard House Tyler Close
Normanton, WF6 1RL
United Kingdom