FCC ID Q78-ZTEMF210V

Q78ZTEMF210V, Q78 ZTEMF210V, Q78-ZTEMF210V, Q78-ZTEMF21OV, Q78-ZTEMF2I0V, O78-ZTEMF210V, 078-ZTEMF210V

ZTE Corporation GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA 850/1900 Module ZTEMF210V

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: Q78-ZTEMF210V is Q78. The remaining characters of the FCC ID, -ZTEMF210V, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA 850/1900 Module

Application: GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA 850/1900 Module
Equipment Class: PCB - PCS Licensed Transmitter
Short Link: fcc.id/Q78-ZTEMF210V
Sources: FCC.gov | FCC.report
Registered By: ZTE Corporation - Q78 (China)

App #	Purpose	Date	Unique ID
1	Original Equipment	2010-07-07	Ch7T4vJZb8u8sT2JwoFk0Q==

Operating Frequencies

Colombia Homologation [?]: Q78-ZTEMF210V

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
824.2-848.8 MHz	1.51 Watts	0.041ppm	246KGXW	22H	1
824.2-848.8 MHz	490 mW	0.041ppm	245KG7W	22H	2
826.4-846.6 MHz	150 mW	0.004ppm	4M19F9W	22H	3
1.8502-1.9098 GHz	720 mW	0.02ppm	247KGXW	24E	4
1.8502-1.9098 GHz	370 mW	0.014ppm	248KG7W	24E	5
1.8524-1.9076 GHz	160 mW	0.004ppm	4M23F9W	24E	6

Exhibits

Document	Type	Submitted Available
Agents Letter	Cover Letter(s) Adobe Acrobat PDF (12 kB)	2010-07-07 2010-07-07
Confidentiality Letter	Cover Letter(s) Adobe Acrobat PDF (13 kB)	2010-07-07 2010-07-07
Module Cover Letter	Cover Letter(s) Adobe Acrobat PDF (17 kB)	2010-07-07 2010-07-07
Test Setup Photos II	Test Setup Photos Adobe Acrobat PDF (611 kB)	2010-07-07 2010-07-07
Test Report II	Test Report Adobe Acrobat PDF (465 kB)	2010-07-07 2010-07-07
RF Exposure Report	RF Exposure Info Adobe Acrobat PDF (88 kB)	2010-07-07 2010-07-07
Internal Photos	Internal Photos Adobe Acrobat PDF (305 kB)	2010-07-07 2010-07-07
User Manual	Users Manual Adobe Acrobat PDF (986 kB)	2010-07-07 2010-07-07
Test Setup Photos I	Test Setup Photos Adobe Acrobat PDF (610 kB)	2010-07-07 2010-07-07
Test Report I	Test Report Adobe Acrobat PDF (669 kB)	2010-07-07 2010-07-07
External Photos	External Photos Adobe Acrobat PDF (305 kB)	2010-07-07 2010-07-07
Label	ID Label/Location Info Adobe Acrobat PDF (326 kB)	2010-07-07 2010-07-07
Schematics	Schematics Adobe Acrobat PDF (309 kB)	2010-07-07
Operational Description	Operational Description Adobe Acrobat PDF (196 kB)	2010-07-07
Antenna Description	Operational Description Adobe Acrobat PDF (7 kB)	2010-07-07
Tune Up	Parts List/Tune Up Info Adobe Acrobat PDF (98 kB)	2010-07-07
Parts List	Parts List/Tune Up Info Adobe Acrobat PDF (35 kB)	2010-07-07
Block Diagram	Block Diagram Adobe Acrobat PDF (62 kB)	2010-07-07

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	ZTE Corporation
FCC Registration Number (FRN):	0009043175
Alphanumeric FCC ID:	Q78ZTEMF210V
Unique Application Identifier:	Ch7T4vJZb8u8sT2JwoFk0Q==
Line one:	ZTE Plaza, Hi-tech Park, Nanshan District,
City:	Shenzhen, Guangdong
State:	N/A
Country:	China
Zip Code:	518057

TCB Information

TCB Application Email Address:	[email protected]
TCB Scope:	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID

Grantee Code:	Q78
Product Code:	-ZTEMF210V

Person at the applicant's address to receive grant or for contact

Name:	Royce Wang
Title:	Product Certification Manager

Telephone Number:

0086-755-26770345

Extension:

Fax Number:	0086-755-26770347
Email:	[email protected]

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA 850/1900 Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Transmitter: Output power is conducted. This device is to be used in mobile or fixed applications only. Output power listed is conducted. The highest radiated output power measured in the specific configurations shown in filing is Part 22 ERP 0.661 W, Part 24 EIRP 0.355 W. The antenna gain including cable loss must not exceed the values documented in this filing for compliance with Part 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Royce Wang

Title of authorized signature: Product Certification Manager

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom

Date of Grant: 07/07/2010

Application Dated: 07/07/2010

ZTE Corporation

ZTE Plaza, Hi-tech Park, Nanshan District,

Shenzhen, Guangdong, 518057
China

Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Q78-ZTEMF210V

Name of Grantee:	ZTE Corporation

Equipment Class:	PCS Licensed Transmitter
Notes:	GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA 850/1900 Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.8	1.51	0.041 PM	246KGXW
	22H	824.2 - 848.8	0.49	0.041 PM	245KG7W
	22H	826.4 - 846.6	0.15	0.004 PM	4M19F9W
	24E	1850.2 - 1909.8	0.72	0.02 PM	247KGXW
	24E	1850.2 - 1909.8	0.37	0.014 PM	248KG7W
	24E	1852.4 - 1907.6	0.16	0.004 PM	4M23F9W

Modular Transmitter: Output power is conducted. This device is to be used in mobile or fixed applications only. Output power listed is conducted. The highest radiated output power measured in the specific configurations shown in filing is Part 22 ERP 0.661 W, Part 24 EIRP 0.355 W. The antenna gain including cable loss must not exceed the values documented in this filing for compliance with Part 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with other antennas or transmitters.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China