FCC ID Q78-MF28B

Q78MF28B, Q78 MF28B, Q78-MF28B, O78-MF28B, 078-MF28B

ZTE Corporation LTE/WCDMA FWT MF28B

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: Q78-MF28B is Q78. The remaining characters of the FCC ID, -MF28B, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: LTE/WCDMA FWT

App # Purpose Date Unique ID
1 Original Equipment 2012-06-29 +cMPyJZmKZKVy0Esddd5qQ==
2 Original Equipment 2012-06-29 TzwYd83875hJYdXa/OooTA==
3 Class II Permissive Change 2012-08-21 C/Z2SQZC/8VgmUP0dGRaxQ==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 41,TD 2500 DOWN | LTE 7,2600 UP | UMTS CH 7 UP |
Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes App #
1.8524-1.9076 GHz550 mW0.01ppm4M16F9W24E 1.2
2.412-2.462 GHz 2.4 GHz WiFi290 mW15CCC, MO 3.1
2.412-2.462 GHz 2.4 GHz WiFi290 mW15CMO 2.1
2.422-2.452 GHz 2.4 GHz WiFi130 mW15CCC, MO 3.2
2.422-2.452 GHz 2.4 GHz WiFi130 mW15CMO 2.2
2.5065-2.5675 GHz180 mW0.004ppm18M0D7W27 1.1
2.5065-2.5675 GHz270 mW0.005ppm4M52G7D27 1.3
2.5065-2.5675 GHz170 mW0.006ppm4M52D7W27 1.4
2.5065-2.5675 GHz240 mW0.06ppm9M16G7D27 1.5
2.5065-2.5675 GHz240 mW0.006ppm9M08D7W27 1.6
2.5065-2.5675 GHz200 mW0.06ppm13M6G7D27 1.7
2.5065-2.5675 GHz170 mW0.006ppm13M6D7W27 1.8
2.5065-2.5675 GHz200 mW0.004ppm17M9G7D27 1.9

Exhibits

Available Exhibits

App #Document Type Submitted
Available
3 Product Equality DeclarationCover Letter(s)
Adobe Acrobat PDF (18 kB)
2012-08-20
2012-08-21
3 Class 2 Permissive Change letterCover Letter(s)
Adobe Acrobat PDF (16 kB)
2012-08-20
2012-08-21
3 confidentialityCover Letter(s)
Adobe Acrobat PDF (17 kB)
2012-08-20
2012-08-21
3 declaration of authorizationCover Letter(s)
Adobe Acrobat PDF (17 kB)
2012-08-20
2012-08-21
3 test reportTest Report
Adobe Acrobat PDF (824 kB)
2012-08-20
2012-08-21
3 RF exposure infoRF Exposure Info
Adobe Acrobat PDF (88 kB)
2012-08-20
2012-08-21
3 test setup photoTest Setup Photos
Adobe Acrobat PDF (605 kB)
2012-08-20
2012-12-20
3 internal photoInternal Photos
Adobe Acrobat PDF (2649 kB)
2012-08-20
2012-12-20
1 Declaration letter for LTEAttestation Statements
Adobe Acrobat PDF (12 kB)
2012-08-03
2012-06-29
1 5GHz Band Declaration letterAttestation Statements
Adobe Acrobat PDF (18 kB)
2012-08-03
2012-06-29
1 LTE RF Test reportTest Report
Adobe Acrobat PDF (1490 kB)
2012-08-03
2012-06-29
1 Cover LetterCover Letter(s)
Adobe Acrobat PDF (43 kB)
2012-08-03
2012-06-29
2 internal photo revInternal Photos
Adobe Acrobat PDF (3198 kB)
2012-07-07
2012-12-20
1 internal photo revInternal Photos
Adobe Acrobat PDF (3198 kB)
2012-07-07
2012-12-20
1 Declaration letterCover Letter(s)
Adobe Acrobat PDF (12 kB)
2012-06-29
2012-06-29
2 Declaration letterCover Letter(s)
Adobe Acrobat PDF (81 kB)
2012-06-29
2012-06-29
2 short term confidentialityCover Letter(s)
Adobe Acrobat PDF (30 kB)
2012-06-29
2012-06-29
2 long term confidentialityCover Letter(s)
Adobe Acrobat PDF (82 kB)
2012-06-29
2012-06-29
2 declaration of authorizationCover Letter(s)
Adobe Acrobat PDF (22 kB)
2012-06-29
2012-06-29
2 test reportTest Report
Adobe Acrobat PDF (2062 kB)
2012-06-29
2012-06-29
2 RF exposure infoRF Exposure Info
Adobe Acrobat PDF (67 kB)
2012-06-29
2012-06-29
2 Labe location infoID Label/Location Info
JPEG Image (34 kB)
2012-06-29
2012-06-29
2 ID LabelID Label/Location Info
Adobe Acrobat PDF (137 kB)
2012-06-29
2012-06-29
2 user manualUsers Manual
Adobe Acrobat PDF (905 kB)
2012-06-29
2012-12-20
2 test setup photoTest Setup Photos
Adobe Acrobat PDF (147 kB)
2012-06-29
2012-12-20
2 external photoExternal Photos
Adobe Acrobat PDF (640 kB)
2012-06-29
2012-12-20
1 attestation letterCover Letter(s)
Adobe Acrobat PDF (81 kB)
2012-06-25
2012-06-29
1 short term confidentialityCover Letter(s)
Adobe Acrobat PDF (30 kB)
2012-06-25
2012-06-29
1 long term confidentialityCover Letter(s)
Adobe Acrobat PDF (82 kB)
2012-06-25
2012-06-29
1 declaration of authorizationCover Letter(s)
Adobe Acrobat PDF (22 kB)
2012-06-25
2012-06-29
1 Part 22&24 test reportTest Report
Adobe Acrobat PDF (757 kB)
2012-06-25
2012-06-29
1 Part 27 test reportTest Report
Adobe Acrobat PDF (1784 kB)
2012-06-25
2012-06-29
1 RF exposure infoRF Exposure Info
Adobe Acrobat PDF (83 kB)
2012-06-25
2012-06-29
1 Labe location infoID Label/Location Info
JPEG Image (34 kB)
2012-06-25
2012-06-29
1 ID LabelID Label/Location Info
Adobe Acrobat PDF (137 kB)
2012-06-25
2012-06-29
1 user manualUsers Manual
Adobe Acrobat PDF (905 kB)
2012-06-25
2012-12-20
1 Part 22&24 test setup photoTest Setup Photos
Adobe Acrobat PDF (101 kB)
2012-06-25
2012-12-20
1 Part 27 test setup photoTest Setup Photos
Adobe Acrobat PDF (128 kB)
2012-06-25
2012-12-20
1 external photoExternal Photos
Adobe Acrobat PDF (640 kB)
2012-06-25
2012-12-20

APP # 3 (2012-08-21)

App # Document Type Submitted
Available
3 Product Equality Declaration Cover Letter(s)
Adobe Acrobat PDF (18 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 Class 2 Permissive Change letter Cover Letter(s)
Adobe Acrobat PDF (16 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 confidentiality Cover Letter(s)
Adobe Acrobat PDF (17 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 declaration of authorization Cover Letter(s)
Adobe Acrobat PDF (17 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 test report Test Report
Adobe Acrobat PDF (824 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 RF exposure info RF Exposure Info
Adobe Acrobat PDF (88 kB)
2012-08-20 00:00:00
2012-08-21 00:00:00
3 test setup photo Test Setup Photos
Adobe Acrobat PDF (605 kB)
2012-08-20 00:00:00
2012-12-20 00:00:00
3 internal photo Internal Photos
Adobe Acrobat PDF (2649 kB)
2012-08-20 00:00:00
2012-12-20 00:00:00

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 Declaration letter for LTE Attestation Statements
Adobe Acrobat PDF (12 kB)
2012-08-03 00:00:00
2012-06-29 00:00:00
1 5GHz Band Declaration letter Attestation Statements
Adobe Acrobat PDF (18 kB)
2012-08-03 00:00:00
2012-06-29 00:00:00
1 LTE RF Test report Test Report
Adobe Acrobat PDF (1490 kB)
2012-08-03 00:00:00
2012-06-29 00:00:00
1 Cover Letter Cover Letter(s)
Adobe Acrobat PDF (43 kB)
2012-08-03 00:00:00
2012-06-29 00:00:00

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 internal photo rev Internal Photos
Adobe Acrobat PDF (3198 kB)
2012-07-07 00:00:00
2012-12-20 00:00:00

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 internal photo rev Internal Photos
Adobe Acrobat PDF (3198 kB)
2012-07-07 00:00:00
2012-12-20 00:00:00
1 Declaration letter Cover Letter(s)
Adobe Acrobat PDF (12 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 Declaration letter Cover Letter(s)
Adobe Acrobat PDF (81 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 short term confidentiality Cover Letter(s)
Adobe Acrobat PDF (30 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 long term confidentiality Cover Letter(s)
Adobe Acrobat PDF (82 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 declaration of authorization Cover Letter(s)
Adobe Acrobat PDF (22 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 test report Test Report
Adobe Acrobat PDF (2062 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 RF exposure info RF Exposure Info
Adobe Acrobat PDF (67 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 Labe location info ID Label/Location Info
JPEG Image (34 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 ID Label ID Label/Location Info
Adobe Acrobat PDF (137 kB)
2012-06-29 00:00:00
2012-06-29 00:00:00
2 user manual Users Manual
Adobe Acrobat PDF (905 kB)
2012-06-29 00:00:00
2012-12-20 00:00:00
2 test setup photo Test Setup Photos
Adobe Acrobat PDF (147 kB)
2012-06-29 00:00:00
2012-12-20 00:00:00
2 external photo External Photos
Adobe Acrobat PDF (640 kB)
2012-06-29 00:00:00
2012-12-20 00:00:00

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 attestation letter Cover Letter(s)
Adobe Acrobat PDF (81 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 short term confidentiality Cover Letter(s)
Adobe Acrobat PDF (30 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 long term confidentiality Cover Letter(s)
Adobe Acrobat PDF (82 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 declaration of authorization Cover Letter(s)
Adobe Acrobat PDF (22 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 Part 22&24 test report Test Report
Adobe Acrobat PDF (757 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 Part 27 test report Test Report
Adobe Acrobat PDF (1784 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 RF exposure info RF Exposure Info
Adobe Acrobat PDF (83 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 Labe location info ID Label/Location Info
JPEG Image (34 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 ID Label ID Label/Location Info
Adobe Acrobat PDF (137 kB)
2012-06-25 00:00:00
2012-06-29 00:00:00
1 user manual Users Manual
Adobe Acrobat PDF (905 kB)
2012-06-25 00:00:00
2012-12-20 00:00:00
1 Part 22&24 test setup photo Test Setup Photos
Adobe Acrobat PDF (101 kB)
2012-06-25 00:00:00
2012-12-20 00:00:00
1 Part 27 test setup photo Test Setup Photos
Adobe Acrobat PDF (128 kB)
2012-06-25 00:00:00
2012-12-20 00:00:00
1 external photo External Photos
Adobe Acrobat PDF (640 kB)
2012-06-25 00:00:00
2012-12-20 00:00:00

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 tune up info Parts List/Tune Up Info
Adobe Acrobat PDF (10 kB)
2012-06-29 00:00:00
N/A
2 parts list Parts List/Tune Up Info
Adobe Acrobat PDF (130 kB)
2012-06-29 00:00:00
N/A
2 schematics Schematics
Adobe Acrobat PDF (2111 kB)
2012-06-29 00:00:00
N/A
2 internal photo Internal Photos
Adobe Acrobat PDF (3175 kB)
2012-06-29 00:00:00
2012-12-20 00:00:00

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 parts list Parts List/Tune Up Info
Adobe Acrobat PDF (130 kB)
2012-06-29 00:00:00
N/A

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 block diagram Block Diagram
Adobe Acrobat PDF (101 kB)
2012-06-29 00:00:00
N/A

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 schematics Schematics
Adobe Acrobat PDF (2111 kB)
2012-06-29 00:00:00
N/A

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 operational description Operational Description
Adobe Acrobat PDF (62 kB)
2012-06-29 00:00:00
N/A

APP # 1 (2012-06-29)

App # Document Type Submitted
Available
1 operational description Operational Description
Adobe Acrobat PDF (137 kB)
2012-06-29 00:00:00
N/A
1 tune up info Parts List/Tune Up Info
Adobe Acrobat PDF (10 kB)
2012-06-29 00:00:00
N/A
1 internal photo Internal Photos
Adobe Acrobat PDF (3175 kB)
2012-06-25 00:00:00
2012-12-20 00:00:00
1 block diagram Block Diagram
Adobe Acrobat PDF (101 kB)
2012-06-29 00:00:00
N/A

APP # 2 (2012-06-29)

App # Document Type Submitted
Available
2 test report rev Test Report
Adobe Acrobat PDF (3198 kB)
2012-07-07 00:00:00
2012-06-29 00:00:00

Correspondence

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ZTE Corporation
FCC Registration Number (FRN): 0009043175
Alphanumeric FCC ID: Q78MF28B
Unique Application Identifier: +cMPyJZmKZKVy0Esddd5qQ==
Line one: ZTE Plaza, Hi-tech Park, Nanshan District,
City: Shenzhen, Guangdong
State: N/A
Country: China
Zip Code: 518057

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID
Grantee Code: Q78
Product Code: -MF28B

Person at the applicant's address to receive grant or for contact
Name: Royce Wang
Title: Product Certification Manager
Telephone Number: 0086-755-26770345 Extension:
Fax Number: 0086-755-26770347
Email: [email protected]

Technical Contact
Firm Name:
SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Line 1:
No. 3-2, PingXiang Road, Kunshan,
Line 2:
Jiangsu Province, P.R.C.
Country:
China
Telephone Number:
+86-0512-5790-0158

Extension:
Fax Number: +86-0512-5790-0958
E-Mail:

Non Technical Contact
Firm Name: SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Country: China
E-Mail: [email protected]

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/20/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LTE/WCDMA FWT

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON INTERNATIONAL(KUN SHAN)INC.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-3273456 Extension: 650
Fax Number:  886-3-3270973
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power Output is ERP for Part 22 and EIRP for Part 24 and Part 27. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michael Lin
Title of authorized signature:  Vice President

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ZTE Corporation
FCC Registration Number (FRN): 0009043175
Alphanumeric FCC ID: Q78MF28B
Unique Application Identifier: TzwYd83875hJYdXa/OooTA==
Line one: ZTE Plaza, Hi-tech Park, Nanshan District,
City: Shenzhen, Guangdong
State: N/A
Country: China
Zip Code: 518057

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: Q78
Product Code: -MF28B

Person at the applicant's address to receive grant or for contact
Name: Royce Wang
Title: Product Certification Manager
Telephone Number: 0086-755-26770345 Extension:
Fax Number: 0086-755-26770347
Email: [email protected]

Technical Contact
Firm Name:
SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Line 1:
No. 3-2, PingXiang Road, Kunshan,
Line 2:
Jiangsu Province, P.R.C.
Country:
China
Telephone Number:
+86-0512-5790-0158

Extension:
Fax Number: +86-0512-5790-0958
E-Mail:

Non Technical Contact
Firm Name: SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Country: China
E-Mail: [email protected]

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/20/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LTE/WCDMA FWT

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON INTERNATIONAL(KUN SHAN)INC.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-3273456 Extension: 650
Fax Number:  886-3-3270973
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michael Lin
Title of authorized signature:  Vice President

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ZTE Corporation
FCC Registration Number (FRN): 0009043175
Alphanumeric FCC ID: Q78MF28B
Unique Application Identifier: C/Z2SQZC/8VgmUP0dGRaxQ==
Line one: ZTE Plaza, Hi-tech Park, Nanshan District,
City: Shenzhen, Guangdong
State: N/A
Country: China
Zip Code: 518057

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: Q78
Product Code: -MF28B

Person at the applicant's address to receive grant or for contact
Name: Royce Wang
Title: Product Certification Manager
Telephone Number: 0086-755-26770345 Extension:
Fax Number: 0086-755-26770347
Email: [email protected]

Technical Contact
Firm Name:
SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Line 1:
No. 3-2, PingXiang Road, Kunshan,
Line 2:
Jiangsu Province, P.R.C.
Country:
China
Telephone Number:
+86-0512-5790-0158

Extension:
Fax Number: +86-0512-5790-0958
E-Mail:

Non Technical Contact
Firm Name: SPORTON INTERNATIONAL (KUNSHAN) INC
First Name: Michael
Last Name: Lin
Country: China
E-Mail: [email protected]

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   12/20/2012
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): LTE/WCDMA FWT

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Does not apply

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   SPORTON INTERNATIONAL(KUN SHAN)INC.
First Name:   Alex
Last Name:   Chen
Telephone Number: 886-3-3273456 Extension: 650
Fax Number:  886-3-3270973
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode. Class II Permissive Change for change of antenna.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Michael Lin
Title of authorized signature:  Vice President

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 06/29/2012

Application Dated: 06/25/2012
ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE/WCDMA FWT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.28 0.02  PM 4M16F9W
24E 1852.4  -  1907.6 0.55 0.01  PM 4M16F9W
27 2506.5  -  2567.5 0.27 0.005  PM 4M52G7D
27 2506.5  -  2567.5 0.17 0.006  PM 4M52D7W
27 2506.5  -  2567.5 0.24 0.06  PM 9M16G7D
27 2506.5  -  2567.5 0.24 0.006  PM 9M08D7W
27 2506.5  -  2567.5 0.2 0.06  PM 13M6G7D
27 2506.5  -  2567.5 0.17 0.006  PM 13M6D7W
27 2506.5  -  2567.5 0.2 0.004  PM 17M9G7D
27 2506.5  -  2567.5 0.18 0.004  PM 18M0D7W

Power Output is ERP for Part 22 and EIRP for Part 24 and Part 27. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
  Date of Grant: 06/29/2012

Application Dated: 06/25/2012
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE/WCDMA FWT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.28 0.02  PM 4M16F9W
24E 1852.4  -  1907.6 0.55 0.01  PM 4M16F9W
27 2506.5  -  2567.5 0.27 0.005  PM 4M52G7D
27 2506.5  -  2567.5 0.17 0.006  PM 4M52D7W
27 2506.5  -  2567.5 0.24 0.06  PM 9M16G7D
27 2506.5  -  2567.5 0.24 0.006  PM 9M08D7W
27 2506.5  -  2567.5 0.2 0.06  PM 13M6G7D
27 2506.5  -  2567.5 0.17 0.006  PM 13M6D7W
27 2506.5  -  2567.5 0.2 0.004  PM 17M9G7D
27 2506.5  -  2567.5 0.18 0.004  PM 18M0D7W

Power Output is ERP for Part 22 and EIRP for Part 24 and Part 27. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



Mail To:


EA550460
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 08/21/2012

Application Dated: 08/20/2012
ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA FWT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.29  
CC MO 15C 2422.0  -  2452.0 0.13  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change for change of antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
  Date of Grant: 08/21/2012

Application Dated: 08/20/2012
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA FWT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.29  
CC MO 15C 2422.0  -  2452.0 0.13  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.

Class II Permissive Change for change of antenna.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA233115
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 06/29/2012

Application Dated: 06/29/2012
ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA FWT
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.29  
MO 15C 2422.0  -  2452.0 0.13  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Hi-tech Park, Nanshan District,
Shenzhen, Guangdong, 518057
China
  Date of Grant: 06/29/2012

Application Dated: 06/29/2012
 
Attention: Royce Wang , Product Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Q78-MF28B
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA FWT
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.29  
MO 15C 2422.0  -  2452.0 0.13  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth mode.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA310747

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details